10Plus Carbon Wheels from AliExpress: Are They Worth It?

10Plus offered me a wheelset in exchange for a YouTube review. I picked the wheels myself, and in this article I describe my own experience. I haven't put as many kilometres on them yet as I'd like for a long-term review, so take the test results and my impressions with a grain of salt.

🚴 Why I chose gravel rims

My Ridley runs aluminium DT Swiss G 1800 wheels, which weigh around 1,700 grams. The rim is 20 mm deep with a 26 mm internal width. I ride the bike mostly on the road, but I also take it on rougher roads and gravel shortcuts. I run 32 mm Continental Grand Prix tyres, and what matters to me is a comfortable compromise between speed and comfort.

10Plus offers road, gravel, MTB and triathlon wheels. The road rims have a 21 mm internal width, while the gravel versions are 24 or 25 mm. The gravel wheels come in 38 mm and 45 mm rim depths. I chose the shallower 38 mm option: I don't do short road races, and I'd rather prioritise comfort and more predictable handling in crosswinds.

A wider rim can support the tyre better and change its final shape. The rim and tyre can also line up better aerodynamically. However, I didn't expect this difference to be significant for the kind of riding I do.

10Plus has a T-Series and an E-Series. The T-Series is cheaper and uses steel bearings and a 36-tooth ratchet. The E-Series has ceramic bearings and a 45-tooth ratchet. I went with the E-Series gravel wheels.

📦 Unboxing and first ride

The wheels arrived well packed with no visible damage. The box also included an inspection report with spoke tension values. I don't have a tool to verify those values, so I take the report as information from the manufacturer, not as my own confirmation that the wheels were built correctly.

A big plus for me was that tubeless tape and valves came pre-installed. I mounted 32 mm Continental Grand Prix tyres. It was easy, the beads seated well, and after adding sealant the wheels held pressure. With my previous DT Swiss wheels I had to redo the tape and deal with air leaks; here I had no such problem.

On the first ride, what I noticed most was the freehub. The jump from 36 to 45 teeth is noticeable when you start pedalling, and the hub is also louder. For me that's a bigger change than the weight or aerodynamics.

⚖️ Weight and ride feel

The manufacturer claims 1,440 grams with a ±3% tolerance. My scale showed 1,475 grams including the tubeless tape and valves, so the result fits within the stated tolerance. Compared to the original wheels, that's a saving of about 200 grams.

But I didn't feel a major difference. If I didn't know which wheelset was on the bike, I wouldn't be able to tell by acceleration or speed alone. Lower weight can help when accelerating and a deeper rim can have an aerodynamic advantage, but in normal riding I didn't feel any dramatic change. Your riding position, for example, can matter more for speed than swapping wheels.

🧪 Power meter test

For comparison, I rode the same section on both wheelsets, with the same tyre model and 4 bar of pressure. I tried it at a higher and a lower power output. This wasn't a lab test: the wind and conditions could have changed between runs, so differences of a few seconds can't be attributed to the wheels alone.

  • New 10Plus, higher power: 296 W, time 1:56
  • Original DT Swiss, higher power: 294 W, time 1:55
  • New 10Plus, lower power: 206 W, time 2:08
  • Original DT Swiss, lower power: 206 W, time 2:11

At higher power I was one second slower on the new wheels; at lower power I was three seconds faster. So the results don't show a clear speed gain. On top of that, it was windy during testing and conditions may have changed between runs. These few runs can't reliably tell whether the new wheels are faster. If anything, the test reminded me how small the differences can be and how easily the weather can mask them out on the road.

✅ Are they worth it?

I don't consider 10Plus top-tier race wheels, but as an affordable upgrade they make sense to me. What I appreciate most is the tubeless tape and valves included in the box, the 45-tooth ratchet, and the fact that in my case the wheels shipped from France via DPD with no extra fees. Delivery took about two to three weeks; shipping may vary depending on the specific order.

At the time of filming, the wheelset I chose cost around 12,000 CZK (roughly €480). AliExpress often shows large discounts from a higher original price as well as coupons, so I'd always compare the price with the regular offer. It's a nice upgrade, not a change that will transform your riding on its own. I don't have enough experience yet to judge long-term reliability.

They can be a sensible choice for someone who has heavy or low-quality aluminium wheels and wants to try carbon wheels without investing in a premium set. If you already have light, well-functioning wheels, there's less reason to switch.

Get in on AliExpressu

Published

💬 No comments yet

What are your thoughts? 🤔 Feel free to ask any questions 📫

Avatar